Glass Coating Applications

For a successful glass coating application, the vehicle surface must first be cleaned effectively. It is made ready for the coating to be used on the exterior and interior of the automobile. One of the key points of the coating process is to clean the surface from dirt and stains in order not to stick under the surface to be coated with glass. Since residues remaining on the bottom of the coating will not adhere properly, it will have an ugly appearance. Scratches and stains must be removed and corrected first for shiny and best-looking surfaces.

  What is Glass Coating Preparation Phase?

  Glass coating preparation processes have a structure similar to ceramic coating. The surface to be coated is cleaned of oil, dirt and all dust. It should be made free of any roughness by washing with soap. Then, it should be thoroughly rinsed with water and special products are used to dry. Because; In glass finishes application, the surface must be clean as well as dry. Performing all these operations in an area free of dust and similar substances is as important as the process.

  It contains a special substance that allows the paint and the dirt stuck on the glass to be completely clean through the special products used. When used correctly, the liquid will slide off the surface during cleaning without touching the paint. In this way, the paint does not suffer any damage. Negative processes such as wear and tear are not experienced. It does not contain the feature of removing scratches and strokes and does not give shine. However, as it provides an excellent and fast cleaning of the vehicle, it makes it ready for coating.

  What is Glass Coating Special Cleaning?

  Usually, a clay stick is used for this process. It has the feature of removing stains even from brake dust that is difficult to get out on the rims. It is very important to use it in the right hands. Having these operations done by an unprofessional hand may cause damage to the vehicle. For this reason, our company, which has a professional staff specialized in the field, performs these operations on the vehicle with experience. The use of clay sticks is not used on all types of stains and dust. It should be used in special factories in cases with varnish or powder coating.

  Polishing Process for Glass Coating Preparation

  For this reason, it is important to make the fleet wraps vehicle ready for coating through special materials that are also effective on glass and chrome surfaces. After the use of materials such as clay sticks, the readiness of the vehicle after the cleaning process is checked. A cleaning process takes place again with the help of microfiber cloth and ethanol. After the dirty substances are cleaned from the surface, the abrasions on the paint and scratches are removed by polishing and similar processes. It is also applied with masking tapes.

  How Is Glass Coating Applied?

  Depending on the vehicle and the surfaces to be coated, materials such as syringes, bottles, sprayers are used during coating. The choice of materials depends entirely on the surface. Glass coating application is an easier application than ceramic coating. After the solutions are applied to the surface, the coating process is completed with a perfect design in professional hands.